Tie Down Engineering 26522; Outside Corner (Male)

DOCK SYSTEM<br>A. Outside Corner (Female) -Two 1/2'' welded tabs. Use w/male outside corner. Each leg is 10''Lx5''H. Part # 26521<br>B. Outside Corner (Male)-One 1/2" welded tab. Use w/female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Leg is 10"Lx5"H. Part # 26522<br>C. Outside Corner End-Use at ends of fingers &amp; docks. Ideal for swim floats &amp; ski jump corners. Leg is 10"Lx5"H. Part #26523.<br>D. Inside Corner-Use with outside corners. Leg with elongated holes. 8-1/4"Lx5"H. Part # 26524.<br>E. Inside Corner/Pipe Holder 3" (Part # 26525) Inside Corner/Pipe Holder 2" (Part # 26526)-Use with outside corners. Internal pipe holder to be used with either 2" pipe (Part # 26525) or 1-1/2" pipe (Part # 26526). Welded gusset. 8-1/4"Lx5"H. Requires carriage bolt set(M) for attaching.<br>F. Angle-Use for all cross supports. 2-1/2"Lx5"H. Part # 26527.<br>G. Female T Connector-One welded 1/2" tab. Bolts to side of dock to attach fingers &amp; ramps. Measures 5"Lx5"H. Part # 26528.<br>H. Male T Connector-One welded 1/2" tab. Use with female T connector to attach fingers &amp; ramps. Measures 5"Lx5"H. 3/4" bolt set(N) required for joint. Part # 26532.<br>I. Washer Plate-Use 2 washer plates with each angle. 1-1/2"Lx5"H. Part # 24284.<br>J. Chain Retainer-Bolts to side of dock. Use weights &amp; chains to hold dock in place. Accommodates 1/4" 3/8" &amp; 1/2" chain. 5"Lx5"H. Part # 26529.<br>K. Pipe Holder/Outside 3"-bolts to outside of dock. Carriage bolt set (M) required for attaching. Use 2" pipe to hold dock in place. Part # 24280.<br>L. Lag Bolt Set-bolt &amp; flat washer hot dipped galvanized used to attach flotation drums to dock system. Part # 24288.<br>M. Carriage Bolt Set-used to attach A thru K component parts. 3/8"x2-1/2" bolt flat washer &amp; nut. Hot dipped galvanized. Part # 26530.<br>N. 3/4" Hex Head Bolt Set-for quick disconnect. Used to connect male &amp; female connectors. Galvanized 3/4"x3-1/2". Part # 24278.<br>O. Connector Pin Set-for quick disconnect. Used to connect male &amp; female connectors. Galvanized 3/4" connector pin &amp; hitch clip pin. Part # 26531.<br>ALSO AVAILABLE - NOT PICTURED - Part # 26413. Back Up Plates.<br>All Hardware is designed to use with 1-1/2" thick lumber minimum width 6" and is mounted with 3/8" carriage bolts(M). All male &amp; female dock to dock connectors are made with either 3/4" bolts with lock nut(N) or 3/4" connecting pins(O). Tie Downs' Wood Dock Plan Kit will show the basics on construction for this lightweight and long-lasting floating dock system.

• Standard grade
• Use with a female outside corner to connect docks end to end
• Joint requires 3/4" bolt set or connector pin
• Each leg is 10"L x 5" H
• For more dock hardware information including building guides, go to www.tiedown.com/adock.html
• Unmatched durability
• Unequalled quality