Easy Heat AHB016 Heating Cable For Water Pipe

Count on the AHB series for water pipe heating cable that’s ready to use out of the box. An integral energy saving thermostat controls the AHB cable to automatically protect water pipes when the temperature dips into the critical range. There’s no easier, more effective do it yourself solution for safeguarding water pipes in cold climates.

• Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
• Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
• Cables are rated at 7 Watts per 1 ft (0.30 m)
• Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
• Plugs into a standard 120 Vac outlet, must be GFCI protected
• Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
• Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
• Pre-assembled and ready to install
• Integral thermostat saves energy by powering the cable only when needed